Stainless Steel,Stainless Steel Products,Stainless Steel Manufacturer,Stainless Steel Supplier
search
  • 24

    May

    2023

    profiles,bars,plates

    Introduction To Stainless Steel Grades And Performances Commonly Used In Instruments

    1. 304 stainless steel. it is one of the most widely used austenitic stainless steels. it is suitable for the manufacture of deep-drawing forming parts and acid pipes, containers, structural parts, various instrument bodies, etc. it can also manufacture non-magnetic, low-temperature equipment and pa
  • 24

    May

    2023

    flanges,bars,fabrication center forming

    What Is The Difference Between Nickel-based Materials And Stainless Steel?

    nickel-based materials belong to stainless steel.the content of ni is different:nickel-based alloys are generally referred to as alloys with ni content exceeding 30wt%. common products have ni content exceeding 50wt%. due to their superior high-temperature mechanical strength and corrosion resistanc
  • 24

    May

    2023

    fabrication center forming,nickel alloy welded pipe,stainless steel pipe

    What Is The Difference Between Monel K500 And Monel 400?

    monel 400 alloy is a corrosion-resistant alloy with the largest consumption, the most versatile and excellent comprehensive performance. this alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. at
  • 24

    May

    2023

    stainless steel plates & coils,stainless steel bars,stainless steel profiles

    What Is The Difference Between Flat Steel And Steel Plate?

    1. the performance of the two is differentsteel plate performance:(1) low hardenability. generally speaking, the large quenching diameter of carbon steel is only 10-20 mm.(2) the strength and yield are relatively low. for example, the σs of ordinary carbon steel q235 steel is 235mpa, and the σs of l
  • 24

    May

    2023

    the cancellation of export tax rebates for some steel products

    How The Steel Industry Responds To The Cancellation Of Export Tax Rebates For Some Steel Products

    on may 1, the cancellation of export tax rebates for some steel products was officially implemented! the adjustment will appropriately increase the export tariffs of ferrosilicon, ferrochrome, high-purity pig iron and other products. after the adjustment, the export tax rate of 25%, the temporary ex
  • 24

    May

    2023

    Stainless Steel Manufacturer,stainless steel profiles,Stainless Steel Products

    Process Introduction, Characteristics And Application Of Welding Processing

    welding processing refers to a processing method in which weldments are combined by heating or pressing, or both. according to the state of the metal in the welding process, welding methods can be divided into three categories: fusion welding, pressure welding and brazing. among them, arc welding is
  • 24

    May

    2023

    Stainless Steel Products,stainless steel bars,plates

    Process Introduction In The Process Of Bending Pipe

    the pipe bending should be made with a pipe with a positive wall thickness tolerance. the bending radius of the high-pressure steel pipe should be greater than 5 times the outer diameter, and the bending radius of other pipes should be greater than 35 times the outer diameter of the pipe; when makin
  • 24

    May

    2023

    fittings,stainless steel welded pipe,stainless steel pipe

    Which Is Better Between 304 Stainless Steel And 316 Stainless Steel?

    which is better between 304 and 316 stainless steel? what is the difference between 304 and 316 stainless steel? which 304 or 316 stainless steel is more suitable for food grade use? in fact, both 316 and 304 stainless steels are austenitic stainless steels, which have good rust resistance and corro
  • 24

    May

    2023

    fittings,stainless steel welded pipe,stainless steel pipe

    The Correlation Between The Physical Properties Of Stainless Steel And Temperature

    1、the physical properties of stainless steellike other materials, the physical properties mainly include the following three aspects: thermodynamic properties such as melting point, specific heat capacity, thermal conductivity and linear expansion coefficient, electromagnetic properties such as elec
  • 24

    May

    2023

    plates,Stainless Steel Manufacturer,machining

    What Is 317L Stainless Steel?

    alloy 317l (uns s31726, 00cr19ni13mo3) is an austenitic stainless steel based on molybdenum. compared with conventional chromium-nickel austenitic stainless steels such as 304 alloy, it has stronger resistance to chemical corrosion. in addition, compared with conventional stainless steel, 317l alloy
< 1 2 3 4 5 6 7 8 9 10 >
WhatsApp

WhatsApp

E-mail

E-mail

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept
Decline