Inconel 600 is a nickel-chromium-iron-based solid solution strengthened alloy. It has good high temperature corrosion resistance (acid and alkali resistance) and oxidation resistance, excellent cold and hot processing and welding process performance, and has satisfactory thermal strength below 700°C And high plasticity. Inconel 600 alloy is designed for low temperature to 1093℃ environment. The oxidation resistance at high temperature is extremely excellent, and it has good oxidation resistance and carbonization resistance stability at 1093°C (but in a reducing atmosphere containing hydrogen sulfide, its upper limit temperature is 535°C).

Incoloy A-286(UNS S66286/W. Nr.1.4980) nickel-based alloy is a Fe-25Ni-15Cr-based high-temperature alloy, which is comprehensively strengthened by adding molybdenum, titanium, aluminum, vanadium and trace boron. Incoloy A-286 is a nickel-chromium-iron alloy resistant to high-temperature oxidation and carbonization. It is designed to resist oxidation and carbonization at elevated temperatures.

Inconel 617 (2.4663 /UNS N06617)has excellent corrosion resistance in hot corrosion areas such as vulcanization environments, especially in oxidation and carbonization environments that cycle up to 1100°C. These corrosion resistance coupled with excellent mechanical properties make Inconel 617 particularly suitable for high temperature applications.

Inconel 625(UNS N06625/W.Nr.2.4856) is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350°C. It has excellent resistance to inorganic acid corrosion and has excellent corrosion resistance to various corrosive media in oxidation and reduction environments.Alloy 625 shows excellent corrosion resistance in many media. It has excellent resistance to pitting, crevice corrosion, intergranular corrosion and erosion in chloride media.

Inconel 601 (UNS N06601/W.Nr. 2.4851), an alloy material. Excellent oxidation resistance at high temperature, good carbonization resistance, good oxidation resistance, sulfur-containing atmosphere, good mechanical properties at room temperature and high temperature, good stress corrosion cracking resistance due to control Carbon content and grain size, 601 has a higher creep rupture strength, so it is recommended to use 601 in the field above 500 ℃.

Inconel600(UNS N06600,2.4816) alloy is a nickel-chromium-iron-based solid solution strengthened alloy. It has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high plasticity below 700°C.

MONEL K-500(UNS N05500/W.Nr. 2.4375) alloy has corrosion resistance equivalent to 400, but has higher mechanical strength and hardness. It has good thermal corrosion resistance and long-term structural stability. Mainly used to manufacture turbine blades and gas turbine blades on aero engines whose working temperature is below 750℃; used to manufacture fasteners and springs on ships; pump and valve parts on chemical equipment; scraper blades on papermaking equipment Wait.

Monel 400(UNS N04400/W.Nr. 2.4360) is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.