Stainless Steel,Stainless Steel Products,Stainless Steel Manufacturer,Stainless Steel Supplier
search
  • 24

    May

    2023

    profiles,bars,plates

    Demand and production of stainless steel welded steel tubes for automobiles

    demand and production of stainless steel welded steel tubes for automobilesin recent years, with the continuous increase of service life and exhaust temperature, automobiles have put forward higher requirements on the local corrosion resistance of the cold end of the exhaust system and the high temp
  • 24

    May

    2023

    fabrication center forming,nickel alloy welded pipe,stainless steel pipe

    Application of stainless steel in automobile industry

    the application of stainless steel in the automotive industry can be roughly divided into five categories: stainless steel for automobile exhaust systems, stainless steel for automobile fuel tanks, stainless steel for automobile frames, stainless steel parts for automobile and stainless steel for au
  • 24

    May

    2023

    profiles,stainless steel pipe ,Stainless Steel

    Welding Handbook for Stainless Steel Pipe

    1 overview installed capacity: 2x 150t/h+2x30mw, this unit's steam generator sealed oil pipeline, material is 1cr18ni9ti. project name: stainless steel pipe welding operation guide 2 basis for preparation: 2.1 design drawings 2.2 "technical specifications for welding of thermal power plants" dl/t 8
  • 24

    May

    2023

    Stainless Steel Products,stainless steel bars,plates

    Effect of solid solution on stainless steel pipe fitting and flange

    stainless steel pipe flange and fitting manufacturing companies should consider the cost of pipe fittings, but should also consider preventing corrosion and improving product quality.factors, therefore, the solid solution process is adopted in the stainless steel pipe flange manufacturing process to
  • 24

    May

    2023

    Stainless Steel Products,stainless steel bars,plates

    Why should stainless steel pipe be annealed

    austenitic stainless steel is softened by solution treatment. typically, a stainless steel tube is heated to approximately 950 ~ 1150 ° c.for some time, carbides and all kinds of synergistic elements completely and uniformly dissolve in austenite, and then quickly cool when cooled by water, carbon a
  • 24

    May

    2023

    fabrication center forming,nickel alloy welded pipe,stainless steel pipe

    7 Things you DID NOT know about 17-4 PH Stainless Steel

    17-4 stainless steel17-4 stainless steel, also known as sae type 630, is a common and exceptionally durable type of steel used in a diverse variety of industries and applications. the numbers “17-4” refer to its composition: ≈17% chromium and ≈4% nickel. it also can include between 3 and 5% copper.
  • 24

    May

    2023

    profiles,bars,plates

    ISSF announces winners of the Stainless Industry Awards in a webinar

     brussels, 19 may 2020 – the international stainless steel forum (issf) has announced the winners of their awards in the new technology, new development, safety and sustainability categories during a webinar which replaced the traditional ceremony. due to the global pandemic, the winners have n
  • 24

    May

    2023

    flanges,bars,fabrication center forming

    Insufficient Demand restricts China's manufacturing recovery

     china national bureau of statistics service industry survey center and china federation of logistics and purchasing announced on may 31 that the leading indicator of the macroeconomy, the official manufacturing purchasing managers index (pmi) in may, fell slightly to 50.6%, the second consecut
  • 24

    May

    2023

    flanges,bars,fabrication center forming

    The Difference Between 316 Stainless Steel Rods and 304

    304 vs 316 stainless steeldid you know that if your rc drill rig is currently equipped with 304 stainless steel drill rods there’s a good chance your client’s hole survey is going to produce false data and that this is likely your fault?we’re going to explore the difference between 304 and 316 stain
  • 24

    May

    2023

    profiles,bars,plates

    What is different with Inconel 625 718

    general characteristics of inconel 718 alloyinconel 718 is a nickel-based precipitation-hardening alloy designed for very high yield strength, tensile strength and creep rupture properties at temperatures up to 1300ºf (705ºc.) the alloy has excellent weldability.          &n
< 1 2 3 4 5 6 7 8 >
WhatsApp

WhatsApp

E-mail

E-mail

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept
Decline