Nimonic alloy 263( N07263/c263/NCK20D) is a sheet alloy based on nickel-cobalt-chromium and aging strengthened with aluminum and titanium elements. It has high yield strength and creep strength below 800°C, low strain aging cracking tendency, and good thermal fatigue performance. , And have satisfactory formability and weldability. The alloy is mainly used for components of aero-engine combustion chambers and afterburners.

Nimonic 105(UNS N13021/ DIN 2.4634) is a Ni-Co-Cr-based precipitation hardening deformation superalloy. Nimonic 105 alloy has been used in the manufacture of aero-engine turbine blades, sector seals, high-temperature bolts and other parts, and the batch production and use are in good condition. Nimonic 105 alloy has large deformation and tensile resistance, which should prevent cracking during forging and rolling. The suitable drawing temperature for cold drawn bars is about approx.

Nimonic 90 is an age-strengthening cobalt-nickel-based deformed high-temperature alloy, which contains a relatively high amount of cobalt and a variety of strengthening elements.

Nimonic 80A(2.4952 / 2. 4631 / ATGS3 / NC20TA / 2HR1 / 2HR201 / 2HR401 / 3HR601 / DTD736B ） nickel-based superalloy is a nickel-chromium matrix, aluminum and titanium are added to form a γ'phase dispersion strengthened superalloy. Except for a slightly higher aluminum content, it is similar to GH4033. The operating temperature is 700～800℃, at 650～ It has good creep resistance and oxidation resistance between 850°C.

Nimonic 75(UNS N06075/AMS 5715/MSRR 7004/AFNOR NC 20T/BS HR 5/DIN 17752) high temperature alloy is a high temperature resistant alloy that can withstand 800+℃; it is based on nickel as the main chemical component, has high density, has excellent high temperature strength, good oxidation resistance and hot corrosion resistance, good fatigue performance, fracture toughness Comprehensive properties such as plates, bars, wires, pipes, flanges and supporting welding consumables are more common in the market.

Nickel Alloy B(AMS5396A/S-NiMo30/2.4800/2.4482/ANC15) has a wide range of applications in the fields of chemistry, petrochemicals, energy manufacturing and pollution control, especially in industries such as sulfuric acid, hydrochloric acid, phosphoric acid, and acetic acid.

The superalloy Nickel Alloy X(UNS N06002) is a nickel-chromium-molybdenum alloy with cobalt and tungsten added. Nickel X alloy has excellent oxidation resistance at high temperatures up to 1200°C and can also be used in neutral and reducing atmospheres. At the same time, Nickel X alloy can resist carbonization and nitriding atmosphere.

Alloy N(UNS N10003) is a nickel-based high-temperature alloy composed of nickel, molybdenum, chromium and other elements, with a nickel content of about 72%. Alloy N has good oxidation resistance, and the melting point temperature range is 1300~1600°F (704 to 871°C).

Incoloy 926(UNS N08926/W.Nr.1.4529) belongs to super austenitic stainless steel，Incoloy 926 is a nickel-based alloy containing titanium and aluminum. It contains enough chromium to form and maintain a sufficient scale of chromium oxide to protect it under high temperature conditions. Incoloy 926 is more resistant to...

The Cr content in Incoloy 925 nickel-based alloy is usually 19.5-23.50%, and the nickel content is 42.0-26.0%. It is a nickel-based alloy containing molybdenum and copper, with good hot and cold working properties.

Incoloy 901 is an austenitic age-hardening alloy based on Fe-43Ni-12Cr, adding titanium, aluminum and equal strengthening elements, and contains a small amount of boron and lower carbon. It is metastable γ"[Ni3(Ti, Al)] phase dispersion strengthening, a small amount of aluminum can inhibit the conversion of γ" to η-Ni3Ti phase.

Inconel 690 has excellent resistance to intergranular corrosion and intergranular stress corrosion cracking. Therefore, inconel 690 is mainly used as a heat transfer tube material for steam generators in pressurized water reactor nuclear power plants.