A 180º elbow, also known as a "180 bend" or "180 ell", is commonly used in Petro-Chemical Industry, Oil and Gas Industry, Nuclear Industry, Pulp &Paper Industry, Research & Development, Mega Projects & Defense & Development Industries.

​Butt Weld Fitting. Butt-weld Fittings are used in a piping system to change direction or function of media, which is mechanically welded to the system completely.

Standards: ANSI B16.9, ANSI B16.28, MSS-SP-43, DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, EN10253-1, EN10253-2

Butt Weld Fittings are used on permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required.

Pipe fitting is the part that connects, controls, diverts, diverts, seals and supports in piping system. Schedule 10 Type A 304L SS Stub End is used for for pipe sealing. It is made of high-quality stainless steel, which is corrosion resistant and wear-resistant.

Type B- Type “B” stub ends are for use with standard slip-on flanges acting as lap joint flanges.The lap thickness on these stub ends is greater than or equal to,the nominal thickness of the pipe wall.

​Short Stub End / ANSI / ASME B16.9 Standard Seamless Alloy Steel Stub End Fittings Butt Weld Pipe Fittings, ANSI Stainless Steel Pipe Fittings Sch10 Lap Joint Stub End, Stub End Type B Stainless Steel Seamless Pipe

Stainless steel pipe reducers are used in piping systems to connect pipes of two different diameters. The reducer has two parallel ends that are centered to one another, resembling a cone.

Our Stainless Steel Concentric Reducers have high-strength and corrosion resistance for use in various industries. Our high-quality reducers come in a variety of sizes and schedules starting from S/5 to S/80.

A stainless steel eccentric reducers is a fitting used in piping systems between two pipes of different diameters. They are used where the diameter of the pipe on the upstream side of the fitting

Stainless steel sanitary concentric reducers are used on permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required.

The Merit Brass concentric reducing coupling is a schedule 10 stainless steel 304/304L butt-weld pipe fitting for joining two concentric pipes of different sizes.